11
IO071
12. Remove the lock nuts and rocker arm pivots securing
the rocker arms to the cylinder head.
13. Remove the push rods; then remove the push rod
guide plate.
IO072A
14. Remove the cap screws securing the head to the cyl-
inder; then remove the head and account for a gasket
and the location of the two dowel pins.
IO073
15. Remove the nut securing the flywheel to the crank-
shaft and starter pulley.
IO069B
16. Using a flywheel puller, remove the flywheel.
IO074
17. Remove the cap screws securing the stator to the
crankcase; then route the stator harness out through
the slot in the crankcase and remove the stator.
IO075A
18. Remove the cap screws securing the crankcase side
cover to the crankcase. Account for dowel pins, gas-
ket, and a crankshaft shim.
IO094B
