34
General Information
ATV Identification
Numbers
The Arctic Cat ATV has two identifi-
cation numbers: Vehicle Identification
Number (VIN) and Engine Serial
Number (ESN).
The VIN is located on the horizontal
frame bar on the front fender frame.
The ESN is located on the left-side of
the engine crankcase.
These numbers are required by the
dealer to complete warranty claims
properly. No warranty will be allowed
by Arctic Cat if the VIN or ESN is
removed or mutilated in any way.
Always provide the ATV name, VIN,
and ESN when contacting an autho-
rized Arctic Cat ATV dealer for parts,
service, accessories, or warranty. If a
complete engine must be replaced, ask the dealer to notify Arctic Cat for
correct registration information.
Ignition Switch Key
Two keys come with the ATV. Keep the
spare key in a safe place.
Control Locations and Functions
Ignition Switch
The ignition switch has two positions.
OFF
position — All electrical circuits are
off. The engine will not start. The key can
be removed in this position.
ON
position — The ignition circuit is
complete, the engine can run, and the
headlights and taillight are on. The key
cannot be removed in this position.
Hand Brakes
The hand brakes should be applied whenever a braking situation is
needed.
Apply the brakes by compressing the brake levers toward the handlebar.
Brake Lever Lock
To engage and release a brake lever
lock, use the following procedure.
1. Compress the left brake lever.
2. Depress and hold the brake
lever lock.
3. While holding the brake lever
lock, release the brake lever.
KM809A
KM037A
ATV-0055A
CAUTION
Leaving the ignition switch in the ON position for a long period of
time when the engine is not running may cause the battery to dis-
charge. Always leave the ignition switch in the OFF position when
engine is not running.
MD0010
KC333A
