18
!
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Prevention
B. Throttle
The throttle should have a free, smooth
range of motion. If it seems to “stick” at any
point, refer to the General Maintenance sec-
tion of this Operator’s Manual for instruc-
tions. Driving your ATV with a sticking
throttle can turn your leisurely ride into an
unwelcome accident. Don’t drive your ATV if the throttle sticks.
3. Lights and Electrical
System
Check that the brakelight and headlights
work. Don’t drive the ATV unless all sys-
tems are working. Check the ignition switch
and engine stop switch.
4. Oil and Fuel
Start with a full tank of gas and check engine
oil before every ride. Don’t forget to check
for fluid leaks around the ATV.
5. Chassis
Grass and leaves can gum-up your suspen-
sion and shocks. Clear and clean the suspen-
sion arms, shock springs, and fenders.
Check smoothness by turning the handlebar
full-left and full-right. Check that there is no
binding, restrictions, free-play, or looseness
in steering components. Check and clear the
drive chain and sprockets of foreign materi-
als and debris. Check drive chain adjust-
ment.
6. Miscellaneous Items
Inspect your air filter. Look for debris or
damage that may indicate you need to
replace it. A clogged filter can stop an
engine. Check your battery terminals for
corrosion. Also, be sure to tighten any loose
parts, nuts, or bolts.
You need to prepare for the unexpected. Emergencies and accidents are
traumatic enough, but they’re even worse when you’re not prepared for
them. At the minimum during every ATV ride, you should have the fol-
lowing items on board:
• Tools
• Water
• Identification
• First Aid Kit
For rides that are longer in duration and distance, the following addi-
tional items are recommended:
• Cellular Phone
• Maps/GPS
• Emergency Kit with Flashlight and First
Aid Kit
Tools
Routine maintenance will generally elimi-
nate the need for emergency repairs. Riding
on rough terrain could cause loosening of
nuts, bolts, and fasteners. Especially on
long rides, carrying the right tools can pre-
vent an inconvenience from becoming a
crisis.
Check:
1. Free, smooth
range of motion
Check:
1. Brakelight
2. Headlights
3. Ignition switch
4. Engine stop switch
Check:
1. Suspension arms
2. Shock springs
3. Fenders
4. Steering
5. Drive Chain
Check:
1. Gas
2. Oil
3. Fluid leaks
First Aid and Survival
Check:
1. Air filter
2. Battery
3. Tighten parts,
nuts, and bolts
Carry these items on
your ATV:
1. Bulbs
2. Duct tape
3. Rope
4. Spark plugs
5. Spare parts
6. Tool Kit
