background image

63

U.S. EPA Emission Control Statement/Warranty Coverage - ATV (U.S. Only)

STATEMENT/WARRANTY

Arctic Cat warrants to the original retail purchaser, and each subsequent purchaser, that all U.S. EPA-certified Arctic Cat ATV’s are designed, built, and
equipped to conform to all U.S. EPA Emission Control Regulations. Please read the following information completely.

Your authorized Arctic Cat ATV dealer will repair or replace any defective emission-related component at no cost to you during the warranty period. You
may have non-warranty service performed by any repair establishment that uses equivalent components. The regulations provide significant civil penal-
ties for tampering that causes your ATV to no longer meet U.S. EPA emission standards.

Arctic Cat further warrants that the engine and its emission-related components are free from defects in materials or workmanship that could cause the
engine to fail to comply with applicable regulations during the warranty period.

If you have any questions about this information, or the emission warranty coverage statement, contact your local authorized Arctic Cat ATV dealer.

WARRANTY PERIOD

The emission warranty period for this ATV begins on the same date as the standard warranty coverage and continues for 30 months or 3100 miles,
whichever comes first.

COMPONENTS COVERED

The emissions warranty covers major emissions control components and emission-related components listed as follows

     Engine Management and Sensors

Fuel/Air System

Ignition System

Miscellaneous Items Used in

Barometric Pressure Sensor

Fuel Injectors

Ignition Coil

Aforementioned Systems

Camshaft Position Sensor

Fuel Pressure Regulator

Knock Sensor System

Connectors

Engine Control Module (ECM)

Fuel Pump

Spark Plugs

Switches

Engine Coolant Temperature Sensor

Carburetor(s)

Capacitive Discharge Ignition (CDI) Module

Gromments

Intake Air Temperature Sensor

Turbocharger Assembly

Magneto Pick-Up

Clamps

Manifold Absolute Pressure Sensor

Air Bypass Valve

Hoses

Oxygen Sensor

Turbo Waste Gate Control Valve

Ties

Throttle Position Sensor

Crankcase Ventilation System

Gaskets

Crankshaft Position Sensor

ISC Valve

Wiring

Exhaust Temperature Sensor

OWNER’S RESPONSIBILITIES

The owner of any ATV warranted under this Arctic Cat Emission Control Statement is responsible for the proper maintenance and use of the ATV as stated in the Operator's
Manual. Proper maintenance generally includes replacement and service, at the owner's choosing, such items as air filter, oil and oil filter, or any other part, item, or device
related to emissions control as specified in the Operator's Manual. It is the owner's responsibility to ensure that the ATV is used in a manner for which it was designed.

Summary of Contents for 450 XC 2011









































































Reviews: