69
DE155A
DE158B
2. Install the low driven gear onto the bearing with
the shift dog slots directed toward the fine-splined
section of the countershaft; then secure with a
splined washer and lock washer.
DE184
3. Place a splined thrust washer onto the counter-
shaft; then install the reverse driven gear bushing
and bearing.
DE185A
4. Install the reverse driven gear onto the bearing;
then secure with a splined washer and snap ring.
NOTE: Always install snap rings with the flat
(sharp) side away from the washer.
DE186
5. Install the reverse shift dog and splined bushing
onto the shaft; then secure with a snap ring.
DE187A
6. Install the countershaft drive gear and thrust
washer.
7. Install the high/low shift dog with the raised lugs
directed toward the low driven gear.
Manual
Table of Contents
For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
