Arctic Cat 2010 366 Operator'S Manual Download Page 50

Page: 50 / 92

General Information

ATV IDENTIFICATION

NUMBERS

The Arctic Cat ATV has two identifica-

tion numbers: Vehicle Identification

Number (VIN) and Engine Serial

Number (ESN).

The VIN is located on the lower-front

crossmember.

KC0055A

The ESN is located on the rear of the

engine crankcase and is visible from

the side.

KC287B

These numbers are required by the

dealer to complete warranty claims

properly. No warranty will be allowed

by Arctic Cat if the VIN or ESN is

removed or mutilated in any way.

Always provide the ATV name, Vehi-

cle Identification Number, and Engine

Serial Number when contacting an

authorized Arctic Cat ATV dealer for

parts, service, accessories, or warranty.

If a complete engine must be replaced,

ask the dealer to notify Arctic Cat for

correct registration information.

IGNITION SWITCH KEY

Two keys come with the ATV. Keep the

spare key in a safe place. An identify-

ing number is stamped on each key.

Use this number when ordering a

replacement key.

ATV-0055

CONTROL LOCATIONS

AND FUNCTIONS
Ignition Switch

The ignition switch has three positions.

ATV-0056

OFF

position — All electrical circuits

except the accessory plug are off. The

engine will not start. The key can be

removed in this position.



NOTE: The accessory plug is

powered by the battery at all times.

position — The ignition circuit is

complete and the engine can run. The

key cannot be removed in this position.

LIGHTS

position — The ignition cir-

cuit is complete and the headlights and

taillight are on. The key cannot be

removed in this position.

Summary of Contents for 2010 366





























































































Search results

Summary of Contents for 2010 366

Reviews:

Related manuals for 2010 366

Brands by name

Popular brands

Arctic Cat 2010 366, Operator'S Manual

Search results

Summary of Contents for 2010 366

Reviews:

Related manuals for 2010 366

Brands by name

Popular brands