Arctic Cat 120 Sno Pro 2011, Operator'S Manual

Page: 23 / 33

19
1. Open the hood; then disconnect the
harness connector from the head-
light bulb.
2. Remove the bulb from the housing
by rotating it counterclockwise until
loose.
3. Install the new bulb into the hous-
ing; then rotate the bulb clockwise to
lock it into place.
The headlight aim can be adjusted to pro-
vide maximum illumination for the oper-
ator. To adjust headlight aim, adjust the
four headlight adjustment screws until
maximum illumination for the operator is
apparent.
CAUTION
Do not touch the glass portion of the
bulb. If the glass portion is touched,
it must be cleaned with a dry cloth
before installing.