4
DT4600 Pneudraulic Installation Tool (HK1174)
Specifications
POWER SOURCE
90 psi shop air
STROKE
1.125 in (2.86 cm) at full load with losses
WEIGHT
4 lbs 8 oz (2.04 kg)
MAXIMUM AIR PRESSURE
90 psi (6.2 BAR)
MAXIMUM FLOW RATE
6.3 scfm (178 L/m)
MINIMUM CAPACITY
4600 lbs (20.46 kN) @ 80 psi (5.5 BAR)
SPEED/CYCLES
30 per minute
MAXIMUM OPERATING TEMPERATURE
125°F (52°C)
HYDRAULIC FLUID
Hydraulic fluid shall meet DEXRON III, DEXRON VI,
MERCON, Allison C-4 or equivalent ATF specifications.
Fire resistant fluid may be used if it is an ester based fluid
such as Quintolubric HFD or equivalent. Water based fluid
shall NOT be used as serious damage to equipment will
occur.
Where the following trade names are used in this manual, please note:
DEXRON
is a registered trademark of General Motors Corporation.
Loctite
is a registered trademark of Henkel Corporation, U.S.A.
LUBRIPLATE
is a registered trademark of Fiske Brothers Refining Co.
MERCON
is a registered trademark of Ford Motor Corp.
Never-Seez
is a registered trademark of Bostik, Inc.
Quintolubric
is a registered trademark of Quaker Chemical Corp.
Slic-tite
is a registered trademark of LA-CO Industries, Inc.
Teflon
is a registered trademark of E. I. du Pont de Nemours and Company.
Threadmate
is a registered trademark of Parker Intangibles LLC.
TRUARC
is a trademark of TRUARC Co. LLC.
Vibra-Tite
is a registered trademark of ND Industries, Inc. USA.
1.703
4.32
9.11
(with Pintail Deflector)
23.1
13.8 35.1
6.83 17.3
5.13
13.0
10.13
(with Pintail Bottle)
25.7
Inches
cm
NOTE: WARNING Sticker and HUCK
Trademark Sticker must be in place
and readable at all times.
