4
255 Blankdraulic Installation Tool (HK1014)
Specifications
MIN STROKE:
0.625 in (
1.59 cm
)
WEIGHT:
8.8 lbs (
3.99 kg
)
MAX AIR PRESSURE:
100 psi (
6.9 bar
)
MAX FLOW RATE:
11.5 SCFM (
325.64 l/min
)
POWER SOURCE:
90 psi (
6.2 bar
) maximum shop air
MAX OPERATING TEMP:
125° F (
51.7° C
)
MIN PULL CAPACITY:
7500 lbs @ 90 psi
(
34.47 kN @ 6.2 bar
)
SPEED / CYCLES:
30 per minute
HOSE KITS:
Use only genuine Huck Hose Kits rated @
10,000 psi (
689.5 bar
) working pressure.
HYDRAULIC FLUID:
Hydraulic fluid shall meet
DEXRON
®
III, DEXRON VI, MERCON
®
, Allison C-4
or equivalent Automatic Transmission Fluid (
ATF
)
specifications. Fire-resistant fluid may be used if it is
an ester-based fluid such as Quintolubric
®
HFD or
equivalent. Water-based fluid shall NOT be used as
serious damage to equipment will occur.
4°
1.9
(
4.8
)
0.9
(
2.4
)
7.0
(
18.0
)
14.8
(
37.7
)
6.0
(
15.3
)
4.6
(
11.8
)
3.9
(
10.0
)
Ø
Ø
Inches
(
cm
)
Where the following trade names are used in this manual, please note:
DEXRON
is a registered trademark of General Motors Corporation.
GLYD Ring
is a registered trademark of Trelleborg Sealing Solutions Germany GmbH
Loctite
is a registered trademark of Henkel IP & Holding GmbH
LUBRIPLATE
is a registered trademark of Fiske Brothers Refining Co.
MERCON
is a registered trademark of Ford Motor Corp.
MOLYKOTE
is a registered trademark of Dow Corning Corporation
Never-Seez
is a registered trademark of Bostik, Inc.
Quintolubric
is a registered trademark of Quaker Chemical Corp.
Slic-tite
is a registered trademark of LA-CO Industries, Inc.
Spirolox
is a registered trademark of Smalley Steel Ring Company
Teflon
is a registered trademark of Chemours Company FC.
Threadmate
is a registered trademark of Parker Intangibles LLC.
TRUARC
is a trademark of TRUARC Co. LLC.
Vibra-Tite
is a registered trademark of ND Industries, Inc. USA.
