5
Installation - Set-outs
Before installing the pan make sure water outlet and power has been installed in the correct area.
DANGER
These operations should be performed by qualified service personnel.
Electrical Point
Front view
Cistern Heights
Water inlet
Front view
Attach water outlet bracket to back of frame
on left hand side. Install
right angle (or
lugged) elbow with 200 mm length thread
(not supplied),
to the bracket fixed on the
frame. Use supplied 1/2” nuts to lock into
place.
Important:
the front face of the pan bracket
must be flush with the front face of the studs.
Bracket is suitable for use on non compressible
wall materials only. Installer must ensure that
the frame is fixed appropriately to structure to
be able to support 400kg on the pan.
540
1000
1140
min. 20
max. 70
86
90
180/230
320
220
0
0~120
0
180/230
320
220
0
0~120
180/230
320
220
0
0~120
90
30
