TM
1
HIGH-EFFICIENCY TOILET
ITEM #0098923
MODEL #T802
Español p. 15
Français p. 8
DO YOU HAVE?
Supply Line
Adjustable
Wrench
Putty Knife
Flathead
Screwdriver
Carpenter’s
Level
Hacksaw
NOTE:
Items not included.
ARE YOU READY?
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING:
Risk of hazardous gases. If new toilet is not
installed immediately after removing an old toilet, temporarily
gases from escaping. Observe local plumbing and building
codes.
CAUTION:
Handle with care. Vitreous chinaware is glass-like
with sharp edges if broken. Do not drop or handle roughly.
Do not overtighten bolts.
If replacing an existing toilet, follow these general guidelines. (Not all
toilets and connections are the same. Therefore, these guidelines may
or may not apply.)
Remove Old Toilet
1.
dry remaining water from tank and bowl.
2. Disconnect and remove old water supply line.
3. Remove tank from bowl by removing old tank-to-bowl hardware.
4.
5.
or cover to block sewer gases from escaping.)
NOTE:
Mounting surface must be clean and level before new
toilet is installed.
Estimated Installation: 55 Minutes
ATTACH YOUR RECEIPT
Questions, problems, missing parts?
Before returning to your retailer, call our customer service
department at 1-866-417-7564, 8 a.m. - 8 p.m., EST, Monday - Friday.
AB17242
AquaSource
®
is a registered trademark of LF, LLC.
All Rights Reserved.
Safety
Goggles
