15
ARCMASTER 436
RESET CUSTOM
•
This function resets the custom programs.
RESET SCHEDULE
•
This function resets the programming.
UPLOAD
•
Selecting the [
UPLOAD
] you can load custom programs from the current Master to Slave units. To trans-
fer you must enter the password that appears to be the same for the main entrance.
•
During the loading of programs, the Master and Slave units will light yellow.
•
If, during this process, an error occurs, the unit will light up red.
•
If the upload is successful programs of the units will light instead of green.
Note - The default settings for the password corresponding to the combination of keys UP + DOWN +
UP + DOWN. Press ENTER to confirm.
CLOCK
•
Select the [
TIME NOW
] to display the current date and time.
•
Select the [
EDIT TIME
] to change the date and time.
CALIBRATION
•
Enter mode [
CALIBRAT
] to set the white balance custom white color temperatures
•
Select one of 9 pre-programmed settings white.
•
The settings can be changed by acting on the values (000 - 255) relating to the red, green and blue
(
Red - Green -Blue
), through the UP and DOWN.
RGB TO WHITE
•
When [
RGB TO W
] is set to Yes, RGB = 255, 255, 255 color is pure white with the calibration values ad-
justed and set.
•
Instead, when set to No, RGB = 255, 255, 255 color can not be adjusted and will show the maximum
power output.
Note - You can adjust the parameters in the [
CALIBRAT
] mode.
GO WHITE
•
Press the MENU button and select the SET and choose [
GO WHITE
], then press SET. When [
YES
] by
pressing the new set. LEDs appear on the “OK” and the unit will go into [
WARM&COOL WHITE
].