ARCMASTER 436
14
4.11 Editing custom programs
To make changes to the custom programs proceed as follows:
•
Press the MENU button until the display shows [
EDIT CUSTOM
], then press the SET button.
•
Select the program to be changed between
CUSTOM1
and
CUSTOM10
.
•
For each program you can change 20 scenes (
S1 - S20
), acting on the values of the red channel (
Red
), Green
(
Green
), Blue (
Blue
) by changing the values of the function strobe (
Strobe
), the execution time of the scene
(
Time
)and finally fade (
Fade
).
•
The values (
000 - 255
) can be selected using the UP and DOWN.
4.12 Play schedule
To run the program select this command:
•
Press the MENU button until the display shows [
PLAY SCHEDULE
], and activate
Schedule Playing
.
4.13 Schedule
To enter the programming mode the following:
•
Press the MENU button until the display shows [
SCHEDULE
], then press the SET button.
•
Select the day of the execution of the programming of
SUNDAY
,
MONDAY
,
TUESDAY
,
WEDNESDAY
,
THURSDAY
,
FRI-
DAY
,
SATURDAY
and
EVERYDAY
.
•
Select the program (
RGB (1-10)
,
RGBL (1-10)
,
CUSTOM (1-10)
,
STATIC
or
Play none
).
•
Set the start time and end that run.
Note - If there is conflict in set periods, the first scheduled event has priority over the second event. Moreo-
ver, if there is no conflict between the Everyday mode and one day of the week, the latter shall prevail.
4.14 Patch
Enter the mode in the case of patch management controller with simple LED headlamp.
•
Press the MENU button until the display shows [
PATCH
], then press the SET button.
•
Create programs from
Patch1
to
Patch6
selecting automated programs from
RGB (1-10)
,
RGBL (1-10)
,
CUSTOM
(1-10)
.
Note - In the management controller to select the operating mode
Easy play
.
4.15 Settings
•
Press the MENU button and select the item using the arrow keys [
SET
] to confirm press the SET button.
PASSWORD
•
Enter the [
PASSWORD
] to enable or disable the password.
- If you select On, the unit’s operation will be password protected after 30 seconds of inactivity.
- If you select Off, you can operate freely at all times.
ALLOW EDIT
•
This function enables or disables editing programs in the automatic mode.
RESET ALL
•
This function resets all the original factory settings.