ArchWork ARCGROUND36RGB, User Manual

Page: 24 / 36

ARCGROUND36RGB
6
2.2 Wiring diagrams
• Unscrew the junction box and remove the cover. Fetch the terminal for cable connection.
• Put the cable (Ø 6-8 mm) through the junction box.
• Tighten the terminal with the cable according to the instruction.
• Screw the junction box.
2.3 Adjust the beam angle
The bolts that secure frame to the body must be fully tightened in a uniform manner, alternating between
diametrically opposed bolts. To facilitate the extraction of the glass without damaging the seal, unscrew
all the nuts except for two adjacent ones and wait a few seconds; then unscrew the remaining nuts and
remove the glass.
30 mm
10 mm
Ø 6-8 mm
Terminal
DATA GND (Black) LIVE (Black)
DATA + (Red) NEUTRAL (White)
DATA - (Green) EARTH (Green)
Fig.5
Fig.4