ArchWork ARCCELL12RGB, User Manual

Page: 15 / 24

5
ARCCELL3RGB/3TRI/6RGB/12RGB/12TRI
- 2 - INSTALLATION
2.1 Installation
The units should be installed with a power supply and control board for management of LED lighting sy-
stem.
See user manual for full details of mains power requirement, built-in programs and DMX operation.
Connect the end of the LED unit cable directly to the driver or use suitable junction box if the cable has to
be extended.
2.2 Linking
For the number of LED projectors that can be linked together, please follow the maximum power output
limit of each zone of the unit controller.
2.3 Connections
The RJ45 plug that connects the LED unit to the ARCMASTER driver has the follwing wiring:
DMX Controller
DMX
LED LED
RJ45/XLR cable
SPLITTER
PIN Color of wire RGB
1
White/Orange Red LED+
2
Orange Green LED+
3 White/Green Blue LED+
4 Blue White LED+
5
White/Blue Red LED+
6 Green Green LED+
7 White/Brown Blue LED+
8 Brown White LED+