10
3.2 Restore factory settings
Choose the “Format” option and the click “Execute”. The warning message below should appear.
(Fig 3.4)
Click the “OK” to start formatting the ARCFlash. After this operation, please re-plug the ARCFlash into your computer. Now all the data in the
ARCFlash are erased. The public area and secure area will become one disk again.
4 How to use the ARCFlash
The ARCFlash is easy to use. The instructions on how to use ARCFlash in Windows98SE/ME/2000/XP are shown below:
1. Turn on your computer.
2. Plug the ARCFlash into the USB port of the computer. The “Removable Disk” symbol should appears in “My Computer”,
which is also the ARCFlash symbol. Under Windows ME/2000/XP, an icon will appear in the taskbar.
(Fig 4.1)
3. The indicator of the ARCFlash will be flashing when a write or read action is performed.
4. To exit from the process and pull the ARCFlash out, follow the steps below:
Windows 98SE:
Pull out the ARCFlash from the computer when ARCFlash‘s LED stops flashing. The ARCFlash symbol will
disappear automatically.
Windows ME/2000/XP:
Click the icon in the taskbar. A “Stop USB Mass Storage Device — device (e:)” window should appear.
The system then display a new window showing “USB Mass Storage Device can be remove safely”. Click “OK” to close this
window and then remove the ARCFlash .
