arcelik BEKO K70520NE, Service Manual

Page: 14 / 56

AG2014 70 CM REFRIGERATORS
13.11.2013 / REV NO:
00
14
•
Do not install the product in places where the temperature falls below 10°C.
If two coolers are to be installed side by side, there should be at least 4
cm distance between them.
5.4. Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the rating
plate. Our company shall not be liable for any damages that will arise when the product is used without
grounding in accordance with the local regulations.
•
The connection should be in compliance with national regulations.
•
Power cable plug should be within easy reach after installation.
•
The voltage and the allowed fuse protection are specified in the rating plate which is affixed to
the interior of the product. If the current value of the fuse in your house does not comply with
the value in the rating plate, have a licensed electrician install a suitable fuse.
•
The specified voltage should be equal to your mains voltage.
•
Do not make connections via extension cables or multi-plugs.
WARNING: Damaged power cable should be replaced by the Authorized
Service.
WARNING: If the product has a failure, it should not be operated before
repairing. Risk of electric shock!
5.5. Floor balance adjustment
If your refrigerator is unbalanced;
You can balance your refrigerator by turning the front legs of it as illustrated in the figure. The
corner where the leg exists is lowered when you turn in the direction of black arrow and raised
when you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator
will facilitate this process.
WARNING: First unplug the product. Product should not be plugged in
when adjusting the feet. Risk of electric shock!