/
49
/
60
EN
Operating the product
C
Your machine performs
water softening depending
on the hardness level of the
mains water. Remaining
time displayed towards the
end of the programme can
be different from the time
indicated at the beginning
due to this process. The total
duration can also change
while the programme is
running depending on the
ambient temperature where
your machine is installed,
temperature of the mains
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when it
is running. Stop the machine
by pressing Start/Pause/
Cancel key if you have to
open the door. Then, open
the door of the machine.
There may be a rush of
vapour when you open the
door of your machine; be
careful. Close the door of
your machine and press
Start/Pause/Cancel key
again. Programme will
resume running.
Programme step follow-up
You can follow-up the washing step
in which the current programme is in
from the Programme Steps Follow-up
indicator on the display.
a
17
b
c
d
a) Washing Step indicator
b) Rinsing Step indicator
c) Drying Step indicator
d) End of Programme indicator
Indicators for Washing / Rinsing /
Drying will light respectively on the
display throughout the washing
programme. Indicator of a finished
step will not go off, but they will light
by adding on each other. When the
programme is over, indicators of
washing steps go off and only the End
of Programme indicator lights.
C
None of the Programme
Steps Follow-up indicators
will light while the Time
Delay is enabled.
C
After the rinsing step the
machine will wait silent in
pause mode for some time
in order to have the water
remaining in the machine
and on the dishes drained
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.
