Safety and environment instructions
5/36EN
Refrigerator / User Guide
t
The more refrigerant a refrigerator
contains, the larger the installation
location must be. If the installation lo-
cation is too small, flammable refrige-
rant and air mixture will accumulate in
cases of refrigerant leakage in cooling
system. The required space for each 8
gr of refrigerant is 1 m
³
minimum. The
amount of refrigerant in your product
is indicated on the Type Label.
t
Product must not be installed in pla-
ces exposed to direct sunlight and it
must be kept away from heat sources
such as hobs, radiators, etc.
If it is inevitable to install the product
close to a heat source, a suitable insulati-
on plate must be used in between and the
following minimum distances must be
kept to the heat source:
- Minimum 30 cm away from heat
sources such as hobs, ovens, heater units
or stoves,
- Minimum 5 cm away from electric
ovens.
t
Protection class of your product is
Type I. Plug the product in a grounded
socket that conforms the voltage,
current and frequency values stated
on the type label of the product. The
socket must be equipped with a 10 A –
16 A circuit breaker. Our company shall
not be liable for any damages that will
arise when the product is used witho-
ut grounding and electrical connection
in accordance with the local and nati-
onal regulations.
t
Product must not be plugged in during
installation. Otherwise, there is the
risk of electric shock and injury!
t
Do not plug the product in sockets
that are loose, dislocated, broken,
dirty, greasy or bear the risk of getting
in contact with water.
t
Route the power cable and hoses (if
any) of the product in a way that they
do not cause risk of tripping over.
t
Exposing the live parts or power cable
to humidity may cause short circuit.
Therefore, do not install the product
in places such as garages or laundry
rooms where humidity is high or water
may splash. If the refrigerator gets wet
with water, unplug it and call the aut-
horised service agent.
t
Never connect your refrigerator to
energy saving devices. Such systems
are harmful to your product.
A
0QFSBUJPOBMTBGFUZ
t
Never use chemical solvents on the
product. There is the risk of explosion!
t
If the product malfunctions, unplug it
and do not operate until it is repaired
by the authorised service agent. There
is the risk of electric shock!
t
Do not place flame sources (lit cand-
les, cigarettes, etc.) on or close to the
product.
t
Do not climb on the product. There is
the risk of falling and getting injured!
t
Do not damage the pipes of the coo-
ling system with sharp or penetrating
objects. The refrigerant that might
come out when the refrigerant pipes,
pipe extensions or surface coatings are
punctured causes skin irritations and
eye injuries.
t
Unless recommended by the manu-
facturer, do not place or use electrical
devices inside the refrigerator/deep
freezer.
t
Be careful not to trap your hands or
any other part of your body in the mo-
