PUMP AND RAM ASSEMBLY CONTINUED
7
4. Rest pump against
press and ram
frame for support.
5. Pump must be threaded
through ram frame and
back out so the hose is
on the outside of the frame.
See Step 6.
6. Once pump and ram are
on press bed as shown,
you are ready to move
on to mounting the pump
assembly.
WARNING
Hose must be on the OUTSIDE of ram frame, or it will NOT be mountable to the press.
8
A
Note:
There are two sets of holes for bolts. Use centermost holes on the side.
This end up
Note:
Ram has been dropped into
ram frame, resting on the bed.
Note:
Hose from pump’s outer side must run BEHIND
the frame. Hose with nozzle will be used later.
B
This end up
Attach bolts up through ram frame to matching holes in press.
Hand tighten. Wrench tighten after both bolts have been installed.
Ram is now able to move left and right within ram frame.
CP201 Operation Manual
6
