background image

ALJ2T User Manual 

rev.  102413

TROUBLESHOOTING

Important: 

Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In 

accordance with ASME PALD Load Sustaining Test: “A load not less than the rated capacity…shall not lower more than 

1/8" (3.18mm) in the first minute, nor a total of .1875" (4.76mm) in 10 minutes.” Lowering within this range is considered 

normal operation and is NOT a warrantable defec

PROBLEM

ACTION

1. Unit will not lift load.

Purge air from hydraulic system by following procedure under 
SETUP.

2. Unit will not sustain load or feels “spongy” under load.

Purge air from hydraulic system as above.

3. Unit will not lift to full height.

Purge air from hydraulic system as above.

4. Unit will not lower completely.

Check oil level. Make sure hydraulic system is not overfilled.

5. Handle tends to raise up while the unit is under load.

Pump the handle rapidly several times to push oil past ball valves in 
power unit.

6. Unit still does not operate.

Contact customer service.

LIMITED WARRANTY

POWERSTATION, LLC WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S POWERSTATION, LLC 
BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.

PowerStation, LLC will repair or replace its PowerStation, LLC branded products which fail to give satisfactory service 

due to defective workmanship or materials, based upon the terms and conditions of the following described warranty 

plans attributed to that specific product. This product carries a ONE-YEAR warranty. During this warranty period, 

PowerStation, LLC will repair or replace at our option any part or unit which proves to be defective in material or 

workmanship.

Other important warranty information:

This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and 

does not cover any repairs or replacement made by anyone other than PowerStation, LLC.The foregoing obligation is 

PowerStation, LLCs’ sole liability under this or any implied warranty and under no circumstances shall we be liable for 

any incidental or consequential damages.

Note: 

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply to you. If you have any questions about warranty service, please contact 

PowerStation, LLC. This warranty gives you specific legal rights and you may also have other rights which vary from 

state to state. 

1-800-879-7316

Monday - Friday 8:30am to 5:30pm EST

P.O. Box 1203
Travelers Rest, South Carolina 29690

SPECIFICATIONS

Lift Capacity

:  

2 Ton (1,818 kgs.)

Min Lift Height

3.5 in. (89 mm)

Max. Lift Height: 

20.13 in. (511.3 mm)

Lifting Range: 

16.6 in. (421.6 mm)

Caster Size:

 

1.75 in. x 1 in. (45 mm x 25.4 mm) 

Saddle Dimensions: 

4.5 in (114 mm)

Handle Length:

 

50 in. (1,270 mm)

Dimensions:

 

26.5 in x 10.75 in x 9.25 in (673 mm x 273 mm x 235 mm) 

Shipping Weight: 

53 Lbs. (24 kgs.)

Summary of Contents for ALJ2T












Reviews: