background image

3

This Handbook covers 4 different models, as follows:

An integrated amplifier

A power amplifier

The DAVE

(Digital Audio Video Entertainment) 

amplifier

The MARC

(Multi Area Remote Control) 

amplifier

SAFETY

There are 19 safety items, set out on page 25 of this Handbook.
For your own safety, and to ensure that your amplifier works 
properly, we strongly recommend that you read them.

SOUND CUTS OUT FOR NO APPARENT REASON

If the temperature of the internal heatsinks rises above a safe level,
then a thermal cut out inside the amplifier will operate.
The POWER INDICATOR on the front panel will turn orange and
the protection system will temporarily remove the power to the
speakers.The system will reset itself as the heatsinks cool down.

When playing a heavily recorded CD it is possible to drive the A22
at full power despite the fact that the volume is not at maximum.
This is because of the high output voltage from a CD player.

AMPLIFIER DOESN’T SWITCH BACK ON

All amplifiers have a 'protection mechanism' which will be 
activated if you switch the unit on again immediately after turning it
off.The mechanism may stop it being turned back on.
If the mechanism activates, wait 30 seconds, then try again.

For ease of use, this handbook has been divided into 4 sections.

Integrated amplifier

Power amplifier

DAVE

(Digital Audio Video Entertainment) 

amplifier

MARC

(Multi Area Remote Control) 

amplifier

Each of the sections has a short introduction to the product,
followed by an 'User Guide' which is primarily for users who have
had their system installed by their dealer or supplier.
Following the 'User Guide' is a section describing 'Advanced
Features' (depending on the complexity of the product).
Finally for customers wishing to set up their own system, a section
called 'Setting Up'.

Integrated amplifier

User Guide

4

Using the Remote Control Handset

5

Advanced features

6

Setting up

7-8

Bi-wiring your speakers

9

Bi-amping

10

Power amplifier

User Guide

11

Setting up

12

Integrated and Power amplifiers - Technical Specifications

13

DAVE amplifier
(HOME THEATRE MODULE)

User Guide

14

Setting up

15-19

Advanced features

20

Remote Control Handset

21

MARC amplifier
(MULTI AREA MODULE)

User Guide

22-23

Advanced Features

24

Safety Guidelines

25

Guarantee

26

Thank you for choosing ARCAM

CONTENTS

FOUR MODELS

IMPORTANT NOTES

Summary of Contents for DAVE Amplifier















Reviews: