CD93
6
CD93
7
E
n
g
li
sh
Technical specification
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and specifications are subject to
change without notice.
Radio interference
The CD93 player is a digital audio device which has been
designed to very high standards of electromagnetic
compatibility.
Both CD players and DACs generate, and can radiate RF (radio
frequency) energy. In some cases this can cause interference
with FM and AM radio reception. If this is the case, keep the CD
player and its connecting cables as far from the tuner and its
aerials as possible. Connecting the CD player and the tuner to
different mains sockets can also help to reduce interference.
EC COUNTRIES -– These products have been designed to
comply with directive 89/336/EEC.
USA – These products comply with FCC requirements.
Laser radiation
If an Arcam CD player is operated whilst the outer casing is
removed, invisible laser radiation could cause eye damage.
NOTE
: All specification values are typical unless otherwise
stated.
Digital to Analogue conversion
High performance 192kHz 24-bit sample rate converter and multiple 24-bit digital to
analogue conversion
Laser pick-up
3 beam
Laser wavelength
780nm
Numerical aperture
0.45
Signal to noise ratio
114dB
Harmonic distortion, 24-bit (1kHz)
<0.0008%*
Frequency response (±0.2dB)
0.15Hz–20kHz
Output level (0dB)
2.2Vrms
Output impedance
47
Ω
Minimum recommended load
5k
Ω
* Using 16-bit, triangular p.d.f. dithered data
Physical
Dimensions
W430 x D290 x H85mm
Weight
6.5kg nett/8.4kg packed
Power consumption
32VA maximum
Digital output connection
75
Ω
co-axial
optical TOSLINK
Supplied accessories
Mains lead
CR-314 remote control
2 x AAA batteries
E&OE
