background image

 

 

- 3 -

  

V487i WMU User’s Guide 

FCC

 

C

OMPLIANCE 

S

TATEMENT

 

NOTE:

 This equipment is authorized under FCC ID:

V72AE11 

to operate in the A Block (re-banding) of the Upper 700 MHz 
Band pursuant to Part 27 of the FCC’s rules. 

In addition, this equipment has been tested and found to 
comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference 
when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used 
in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct 
the interference at his own expense. 

 

 

 

Warning! 
Changes or modifications to this equipment not expressly approved by 
Arcadian Networks, Inc. could void the user’s authority to operate the 
equipment. 

 

Warning! 
This product was tested and shipped with shielded coaxial cable and 
Category 5 Ethernet cable equipped with a shielded RJ-45 connector. 
These cables must be used with the unit to ensure compliance. 

Summary of Contents for V487


















Reviews: