5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
Step 7: To install the seats, tilt the seat slightly upward making sure the ¼-20 machine screws underneath the
seat cushion slide into the notches. Push the seat cushion down until it is flat against the seating unit
(Figure G).
Step 8: To install the backs, align the four z-brackets on the back rest with the four z-brackets on the seating
units and gently push down until the back is flat on the top of the seat (Figure H).
Step 9: To attach the table top, secure the table base to the unit by affixing the 5/16-18 x 1.5” [B] hex bolts
to the bottom of the back panel (Figure I).
continued next page
FIGURE H
FIGURE G
FIGURE I
[B] 5/16-18 x 1.5 hex bolt, 1
