15
Issue date: 05/02/2020
Timer operation to
‘ON’ operation. (LED on module will flash once)
1. Separate magnetic sensor will trigger ON signal to receiver device and
timer will start to count down, once it reaches 0 minute the sensor will
send OFF signal to the receiver device.
2. During timer countdown if you close the magnetic sensor it will not turn
OFF the receiver device, the timer will still countdown until it reaches 0
minuet then sends OFF signal to the receiver device.
3. Or during the timer countdown, if you separate magnetic sensor again
then this will extend the timer further more.
For example:
Function switch in position ‘ON’ and timer set under 5 minutes.
1. When you open the door the sensor triggers ON signal to the receiver
device and 5 minutes timer starts to countdown.
2. During the countdown say around 2 minutes the door is opened again,
the sensor will trigger receiver again which means the timer will extend
another 5 minutes on top of the remainder 3 minutes.
3. So after 8 minutes the receiver device will turn OFF.
DELAY OFF TIMER SETUP
