* Receiver connected lamp will blink twice for confirmation.
* ALL PROGRAMMED MEMORY WILL BE DELETED FROM RECEIVER
RECEIVER HAS 6 MEMORY SETTINGS :
* Self program function RECEIVER has 6 memory settings.
* It can be programmed as to your requirement with special effect. It can be programmed to switch ON at one time individually
or programmed with different combinations switching.
* This means one receiver can be programmed into max. 6 different combination.
Example :
If there is 3 receivers, [ receiver 1 = lamp shade , receiver 2 = night light , receiver 3 = fan ]
Receiver 1,2,3 can be control individually with transmitter button 1,2,3
Receiver 1,3 can be programmed with transmitter button 4, (lamp shade and fan ON/OFF at same time)
(Above settings ‘Receiver 1’ and ‘3’ takes up 2 programmed memory and ‘Receiver 2’ only 1 program memory, different combinations
and settings can be teamed up and control from transmitter )
SPECIFICATION
RECEIVER
Frequency: 433.92MHz
Power: 240V +/-10%, 50Hz
1500 watt / 230VAC
FAULT FINDING
No activation : Check battery polarity or running out battery
Check code program successful.
CAUTION :
Do not place two receivers near each other, the distance should be above 1 meter.
Warning!
DO NOT OVERLOAD
Do not plug or use in damp places like patios, cellar, flammable liquid, solvents, paints etc…
