Version 2.
Clearing Memory
(will remove all paired remote controls):
On the module press the
‘Learn’
button for 6 seconds (LED on module will flash), release then press
once again. Load(s) will flash twice to confirm that all remote control is unpaired.
Operation
ON/OFF Function:
Press the ‘ON’ button on wall switch, the lights will gradually illuminate.
Press the ‘OFF’ button on wall switch, the light will gradually turn OFF.
Fuse Change
In any case of overloading, the fuse will activate. To change fuse simply remove the fuse
compartment and replace a new T5A H250V fuse.
Cautions
Please leave minimum of 1.5 meters in-between 2 or more receivers.
