Version 2.
6.
Turn On mains power and proceed pairing module with wireless wall switch or remote control.
Pairing Receiver
※
Important
※
Load (s) must be under ‘OFF’ state when performing ‘pairing’ and ‘un-pairing’ mode.
Module can pair with up to 6 different remote controls at any one time as it has 6 memories.
Module is not compatible to “Code Switch” remote controls.
Only compatible to “Self Learning” remote controls.
Pairing using
LEARNING MODE
:
1.
On the module press the
‘Learn’
button once (LED on module will flash), this will enter learning
mode.
