Road Glide
Ultr
a C Elec
tr
a Glide
Harley Davidson
Roadglide
Installation Instructions
Tools Needed-
(Amplifier Installation)
#2 Phillips Screwdriver
10mm Open End Wrench
T40 Torx Bit w/handle
1/2” Socket w/ratchet
T25
Torx
Bit
w/handle
Wire
Cutters
Fender
Cover
(Recommended)
Crimpers
Drill
(Recommended)
7/32
Drill
Bit
Hot GLue Gun (Recommended for seperate tweeter installation)
Included in this kit-
Velcro (adhesive backed)
Wire Harness w/terminations
(10) Zip Tie Wire harness straps
Turn on lead w/terminations
(10) BLue insulated wire butt connectors
(3) 10/32 Nut’s
(3) 10/32 dia 1/2 Black allan head bolts
(3) 10/32 lock washers
Installation Instructions
Step 1 -
Protect your investement
It is always recommended that when you are installing your
Arc Audio MPAK Series audio components to protect your motorcycle
from potential damage and use a protective fender cover. This will
reduce the risk of damage from falling tools or debris.
Step 2 -
Remove the Seat
Remove the single #2 Phillips
screw located at the rear of the
seat. Next lift up on the rear of
the seat and carefully slide the
seat backwards and set aside in a
safe place.
