Arbor Technology P1215, Quick Installation Manual

Page: 12 / 22

1 2 P1215 Quick Installation
Parallel Port
The P1215 can support the latest
EPP and ECP parallel port protocolsto
be used to connect a wide array of
printers, ZIP drive, parallel scanner
and any other parallel devices. The printer interface on the P1215 is a 25-pin
female D-SUB connector. To connect any parallel device, follow the steps
below:
1. Turn off the Panel PC system and the parallel devices.
2. Plug in the male connector of the parallel device to the 25-pin female D-
SUB connector and fasten the retaining screws.
3. Turn on the system and the attached parallel devices.
4. Refer to the parallel device's manual for instruction to configure the
operation environment to recognize the new attached devices.
5. You may need to run the CMOS setup to change the hardware device
setup.