Arbor Technology M1923, User Manual

Page: 35 / 88

- 19 -
Getting Started
Follow the sequence below to install the drivers to prevent errors:
a. Onboard Chipset drivers:
Chipset → VGA → Intel ME → Audio and LAN drivers in either order
b. Device drivers:
Wi-Fi, Bluetooth, RFID&NFC, Smart Card Reader, Touch Screen drivers in
any sequence
c. Function key utility:
Install the utility as needed.
The installation process of each driver is basically the same. Just follow the
on-screen instructions to proceed. If prompted to restart the computer, tap
Yes to do so. In some cases, User Access Control will appear asking for
permission to make changes to the computer. Simply tap Yes to continue.
The drivers and utilities provided are described in the table below:
Driver/Utility Necessity Descriptions
Chipset Required
Install the chipset driver to the computer.
Note: Make sure to install the chipset driver before
installing any other drivers to prevent errors.
VGA Required
Install the graphic device driver. Select 64 or 32-bit
according to your operating system.
Intel ME Required
Install the Intel
®
Management Engine (Intel ME)
software.
Audio Required Install the audio driver.
LAN Required
Install the network device driver. Select your
operating system and 64 or 32-bit as required.
WiFi Required
Install the wireless network device driver and client
utilties.
Bluetooth Required
Install the Bluetooth driver. Select your operating
system to proceed.
RFID/NFC
Required for
RFID/NFC
module
Install the RFID/NFC device driver. Select x64
(64-bit) or x86 (32-bit) according to your operating
system.
Smart Card
Reader
Required Install the smart card reader driver.