Arbor Technology M1858 User Manual Download Page 105

Page: 105 / 115

- 91 -

Appendix

•

Map to main display if system has only one display monitor

Tick this check box to enable the function mapping the touch panel to the main

display when the system has only one display monitor.

•

Operation Mode

eGalax driver support split display mode for those applications which do not

map the touchscreen to the full screen of the monitor.

Full screen

The touchscreen will be mapped to the full screen of the specified monitor.

Right screen

The touchscreen will be mapped to the right half screen of the specified

monitor.

Left screen

The touchscreen will be mapped to the left half screen of the specified

monitor.

Upper screen

The touchscreen will be mapped to the upper half screen of the specified

monitor.

Lower screen

The touchscreen will be mapped to the lower half screen of the specified

monitor.

Other operation mode

Quarter 1

The touchscreen will be mapped to the first quarter area of the specified

monitor display.

Quarter 2

The touchscreen will be mapped to the 2nd quarter area of the specified

monitor display.

Summary of Contents for M1858




















































































































Search results

Summary of Contents for M1858

Reviews:

Arbor Technology M1858, User Manual, Page: 105 / 115

Search results

Summary of Contents for M1858

Reviews: