manualshive.com logo in svg

Arbor Technology IEC-3350, User Manual

Share
Download
Arbor Technology IEC-3350 User Manual Download Page 48

- 38 -

BIOS

Use this item to select the highest ACPI sleep state the system will enter 

when the suspend button is pressed.

The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].

► Wake-up Function Settings

Press [Enter] to make settings for the following sub-item:

Wake-up System With Fixed Time

The optional setting are: [Enabled]; [Disabled].

Wake-up System With Dynamic Time

The optional setting are: [Enabled]; [Disabled].

PS2 KB/MS Wake-up

The optional setting are: [Enabled]; [Disabled].

USB S3/S4 Wake-up

The optional setting are: [Enabled]; [Disabled].

USB S5 Power

The optional setting are: [Enabled]; [Disabled].

► Super I/O Configuration

Press [Enter] to make settings for the following sub-items:

Super IO Configuration

ERP Support

The optional setting are: [Disabled] ; [Auto]

This item should be set as [Disabled] if you wish to have all active wake-up 

functions.

► Serial Port 1/3/4/5/6 Configuration

Press [Enter] to make settings for the following items:

Summary of Contents for IEC-3350

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands