Arbor Technology FPC-8100 Series User Manual Download Page 60

Page: 60 / 105

- 48 -

Installation & Maintenance

10. Pull the SMA connector through the above mentioned antenna hole. Note

to meet the aforesaid flattened side with the antenna hole's flat side.

Arrange the flat side of the

SMA connector to meet the flat

side of the antenna hole.

11.

Mount the washer first and then the nut to the SMA connector. Make sure

the nut is tightened.

Mount the washer and the

nut to the SMA connector.

Tighten the nut.

12. Have the external antenna(s). Screw and tightly fasten the antenna(s) to

the SMA connector.

4.1.5. Install SATA Storage Devices

4.1.5.1. Install Internal SATA Storage Device

1. Remove the bottom cover from the computer as described in

4.1.1.3.

Remove the Bottom Cover on page 37.

Summary of Contents for FPC-8100 Series










































































































Search results

Summary of Contents for FPC-8100 Series

Reviews:

Brands by name

Popular brands

Arbor Technology FPC-8100 Series, User Manual

Search results

Summary of Contents for FPC-8100 Series

Reviews:

Brands by name

Popular brands