Arbor Technology FPC-7900 User Manual Download Page 89

Page: 89 / 107

- 77 -

BIOS

5.2.11. USB Configuration

Setting

Description

Legacy USB Support

Enables/disables legacy USB support.

►

Options available are

Enabled

(default),

Disabled

and

Auto

►

Select

Auto

to disable legacy support if no USB device

are connected.

►

Select

Disabled

to keep USB devices available only for

EFI applications.

XHCI Hand-off

This is a workaround for OSes without XHCI hand-off

support. The XHCI ownership change should be claimed

by XHCI driver.

►

The optional settings are:

Enabled

(default)

/ Disabled

USB Transfer time-

out

Use this item to set the time-out value for control, bulk, and

interrupt transfers.

►

Options:

1 sec, 5 sec, 10 sec, 20 sec

(default).

Summary of Contents for FPC-7900












































































































Search results

Summary of Contents for FPC-7900

Reviews:

Related manuals for FPC-7900

Brands by name

Popular brands

Arbor Technology FPC-7900, User Manual

Search results

Summary of Contents for FPC-7900

Reviews:

Related manuals for FPC-7900

Brands by name

Popular brands