Arbor Technology FPC-7900 User Manual Download Page 63

Page: 63 / 107

- 51 -

Installation & Maintenance

4.1.7. Install/uninstall CFast Card

The computer supports a CFast card for storage and comes with an outside-

accessible CFast slot. Follow through the guide below to install a CFast card

to the computer. (This section will use FPC-790X as the installation example.)

FPC-7900

FPC-790X

Note:

Be sure to turn off the computer before installing or uninstalling the

CF card if the OS is installed on the card.

To install the CFast card:

1. From the front panel of the computer, find the door to the CFast slot.

Loosen and remove the screw that locks the door.

2. Once the screw is removed, open the door. The CFast slot then comes

to view.

Follow the printed graphic to

insert the CFast card

CFast card slot

Summary of Contents for FPC-7900












































































































Search results

Summary of Contents for FPC-7900

Reviews:

Related manuals for FPC-7900

Brands by name

Popular brands

Arbor Technology FPC-7900, User Manual

Search results

Summary of Contents for FPC-7900

Reviews:

Related manuals for FPC-7900

Brands by name

Popular brands