Arbor Technology EmQ-i2301, User Manual

Page: 36 / 44

- 26 -
BIOS
3.2.9. SATA Configuration
Select this submenu to configure the SATA controller and HD.
Setting Description
SATA Controller(s)
Enables/disables the present SATA controller.
Enabled is the default.
SATA Test Mode Enables/disables the SATA test mode.
Configures SATA Mode
Configures how to sun the SATA drives.
Options available are AHCI (default) and IDE .
SATA Port 0 Hot Plug
Capability
Enables/disables hot-pluggable feature for the SATA
port.
Enabled is the default.
SATA Port 1 Hot Plug
Capability
SATA Port 0 Connect
to an ODD
Enables/disables the SATA port connect to an ODD
If enabled, when you connect an ODD to a SATA port.
The software auto detection for media insert and tray
will be enabled.
Disabled is the default.
SATA Port 1 Connect
to an ODD
Serial ATA Port 0
Delivers the SATA port Media information and Security
Mode.
Serial ATA Port 1
3.2.10. ACPI Table/Feature Control
Setting Description
FACP - RTC S4 Wakeup
This function will be available only when ACPI is enabled.
Enables/disables S4 Wakup from RTC.
APIC - IO APIC Mode
This item is valid only for WIN2K and WINXP. Also, a fresh
install of the OS must occur when APIC mode is desired.
Enables/disables the APIC mode
DSDT - ACPI S3 Enables/disables ACPI S3 state
DSDT - ACPI S4 Enables/disables ACPI S4 state
BGRT - ACPI BGRT Enables/disables ACPI BGRT Table