Arbor Technology EmQ-i2301, User Manual

Page: 35 / 44

- 25 -
BIOS
3.2.8.5 IGD Configuration
Setting Description
Intergrated Graphics
Device
Enables/disables Intergrated Graphics Device.
Primary Display
Set IGD or PCI graphic device as the Primary Display.
Options are Auto/IGD/PCie.
RC6 (Render Standby) Enables/Disables Render standby support.
PAVC Enables/disables Protected Audio Video control
Power Managment
lock
Enables/disables Power mangement lock.
DOP CG Enables/disables DOP Clock gating.
GTT Size
Set the GTT Size
Options are 1MB/2MB
Apeture Size
Set the Aperture size
Options are 128MB/256MB/512MB
IGD-DVMT Pre-
Allocated
Set the DVMT5.0 Pre-Allocated (Fixed) Graphics Memory
size used by the IGD.
IGD-DVMT total Gfx
Mem
Set the size of DVMT 5.0 used by IGD
IGD Turbo Enables/disables IGD Turbo
IGD Thermal Enables/disables IGD Thermal
Spread Spectrum
clock
Enables/disables Spread Spectrum clock
3.2.8.6 IGD- LCD Control
Setting Description
Force Lid Status
Set mode of as the Primary Display.
Options are ON (default) / OFF / Auto.
BIA
Set the mode of BIA.
Options are Auto (default) /Disabled / Level 1 /Level 2 /Level
3 /Level 4 /Level 5.
ALS Support Enables/Disables ALS support.
IGD Flat Panel Set resolution of IGD Flat Panel.
IGD Boot Type Set the Boot Type of IGD
Panel Scaling
Set the Scaling of Panel
Options are Auto(default) / Centering / Stretching.
GMCH BLC Control
Set the mode of GMCH BLC Control
Options are Auto(default) / PWM-Inverted / GMBus-Inverted
/ PWM-Normal / GMBus-Normal