19
Reset
In case of a software failure, restart can take
place via the reset button. Except for date and
time, setup is retained.
►
Remove the housing cover (9) (see Fig. F1).
►
Press the RESET button briefly with a point
-
ed object (see figure G).
The device restarts.
►
Fit the housing cover (9) again (see Fig. F2).
►
Make the basic setup (
language
,
Date
,
time
–> see
menu
/
Setup
)
EN – Installation instructions
The device may only be connected by an elec
-
trical specialist. An electrical specialist is so-
meone whose technical training, knowledge,
experience and knowledge of the relevant
regulations allows him to assess the tasks assi-
gned to him and recognise potential hazards.
Safety instructions
►
Read these instructions thoroughly prior to
installation and commissioning.
►
After installation pass the
instructions on
to the end user
.
WARNING
Danger of death from electric shocks!
►
Install and connect the device
only in the
de-energized state.
Operating conditions
►
Install thermostat only in conjunction
with electrical heating elements from the
manufacturer's product range.
►
When installing in rooms with bath or sho-
wer facilities: take into account protective
areas according to national installation
standards (in Germany DIN VDE 0100-701).
Also follow all local regulations.
►
When installing
, provide an on-site residu
-
al-current-operated protective device (with
trigger limit less than or equal to 30 mA).
►
If a device without a connector is directly
connected to the fixed electrical installa
-
tions, install an isolator in accordance with
the local provisions for mains disconnec
-
tion.
►
Operate the device
only with the approved
voltage (see typeplate).
►
Store and transport the device
only in the
protective packaging.
Complaint
►
Contact the supplier.
Disposal
►
Packaging and any parts that are not nee
-
ded should be recycled or disposed of pro
-
perly. Observe local regulations.
