Figure 5.17: Downloaded Waveform Data
PSCSV933 provides trigger information the bottom of the waveform
display, whether the trigger is active or inactive during the waveform
recording. For example, if the triggering condition is false the display
will indicate, ”No triggers active”. If a specific trigger is active, then it
will indicate a message with the trigger number; for example if Trigger
number two is active while the recording is going on, it will say, ”User
Triggers Active: 2”. If more than one trigger is active, then all of them
will be listed.
Event Time Tracking.
See event wavefore in Figure 5.18 below. Note
that the actual event time appears below the dark vertical cursor in the
middle of the waveform.
Figure 5.18: Downloaded Event Waveform
By carefully examining the waveforms, you will notice that there are
“holes” in the waveform that correspond with different events.
If two
events are recorded at different times, then the waveform records will be
connected piecewise, however there will be a discontinuity at the end of
the first waveform record and start of the second waveform record.
76
