Date:
An integer, corresponding to the date, which
is the standard format for dates in spreadsheet
applications. The integer for the date is deter-
mined from the following:
1/1/1600 = -109,571
12/30/1899 = 0
1/1/95 = 34700
12/31/3199 = 474,816
Time:
A decimal fraction of 1, corresponding to the
time of day, which is the standard format for
time in spreadsheet applications. This number
is determined by the formula:
N = S/86400, where:
S = number of seconds elapsed since midnight.
Channel 1:
Data point for Channel 1 Waveform.
Channel 2:
Data point for Channel 2 Waveform.
3.11.6
Initiating Printing / Exporting
To print or export data directly, press the PRINT key during the
measurement (see Section 3.11.4 for Bitmap transfers). Ensure that all
RS-232C connections and parameters are properly configured. To print or
export data which had been previously stored, recall the data using the
REVIEW key, select the desired display mode, then press the PRINT key.
97
Summary of Contents for 931A
