background image

User Guide - DA amplifiers

01/2022

DOP_1502_A

Important Safety Instructions

Common symbols and meanings

• 

THE TRIANGLE WITH THE LIGHTNING BOLT IS USED TO ALERT THE USER TO THE RISK OF 
ELECTRIC SHOCK.

• 

THE TRIANGLE WITH THE EXCLAMATION POINT IS USED TO ALERT THE USER TO IMPORTANT 
OPERATING OR MAINTENANCE INSTRUCTIONS.

• 

THE CE-MARK INDICATES THE COMPLIANCE OF THE PRODUCT TO ALL THE APPLICABLE 
EUROPEAN DIRECTIVES

• 

SYMBOL FOR EARTH/GROUND CONNECTION.

• 

SYMBOL INDICATING THAT THE EQUIPMENT IS FOR INDOOR USE ONLY.

• 

SYMBOL FOR CONFORMITY WITH DIRECTIVE 2012/19/EC OF THE EUROPEAN PARLIAMENT 
ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE).

Safety Warnings

• 

OPERATING TEMPERATURE RANGE: 0°C TO +50°C - DERATING ABOVE 35°C.

• 

STORAGE RELATIVE HUMIDITY RANGE: 10% TO 90% HUMIDITY (NON CONDENSING).

• 

DO NOT USE THE UNIT AT ALTITUDES ABOVE 2000 M.

• 

DO NOT USE THE UNIT IN TROPICAL ENVIRONMENT.

• 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT TO OPEN ANY PART OF THE 
UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

• 

CONNECTION TO THE MAINS SHALL BE DONE ONLY BY A ELECTROTECHNICAL SKILLED 
PERSON ACCORDING THE NATIONAL REQUIREMENTS OF THE COUNTRIES WHERE THE UNIT 
IS SOLD.

• 

DO NOT USE THIS AMPLIFIER IF THE ELECTRICAL POWER CORD IS FRAYED OR BROKEN.

• 

TO AVOID ELECTRICAL SHOCK, DO NOT TOUCH ANY EXPOSED SPEAKER WIRING WHILE THE 
AMPLIFIER IS OPERATING.

• 

DO NOT SPILL WATER OR OTHER LIQUIDS INTO OR ON THE AMPLIFIER.

• 

THIS DEVICE MUST BE POWERED EXCLUSIVELY BY EARTH CONNECTED MAINS SOCKETS IN 
ELECTRICAL NETWORKS COMPLIANT TO THE IEC 364 OR SIMILAR RULES

• 

DISCONNECT THE AC MAINS SOURCE BEFORE ATTEMPTING TO CLEAN ANY PART OF THE 
AMPLIFIER

• 

POWERSOFT SUGGESTS TO PLUG THE DA SERIES TO A 16 A RATING, C OR D CURVE, 10 kA 
SECTIONING BREAKER.

Summary of Contents for APG DA


















Reviews: