PAGE 49
AIRBAG OPTIONS
There are three options that can be set for the Front and/or Rear airbags
as follows; A) Select “None” to leave the Air Suspension inactive, B) Select
“Joined” to control them as pairs (eg to level the vehicle from Front to Rear), or
C) Select “Split” to control each side of the vehicle independently of the other
to compensate for uneven vehicle loads. The range of control options will be
dependent on the hardware and LINX accessories you have configured on your
vehicle. Please refer to your nearest ARB outlet for further information
SET OPERATIONAL CONTROL STATE
To set the Front and/or Rear airbags hardware configuration:
1.
Single tap on “Joined” or “Split”
SET MINIMUM AND MAXIMUM AIRBAG OPERATING PRESSURES
1.
Press & hold on the underlined values.
