PAGE 41
LOW BATTERY PROTECTION
To assign “Low Battery Protection” to switch off the INTENSITYS based on Battery
1’s set Low Voltage Alarm level:
1.
Select “
BATTERY 1
” and the
tick box to enable it.
(Refer to the section on “Battery Monitor
Module” for customising the battery settings
and entering a Low Voltage Alarm level)
NOTES
•
In the example shown above, the “Low Battery Protection” on “Battery 1” will ensure that the INTENSITYS are
switched off (even though your High Beam lamps are still switched on) once the battery level drops below the set
limit.
•
All automation functions are user over-ridable. In the example above, LINX will automate the INTENSITYS to come
on whenever the high beams are activated, but the INTENSITYS can still be switched off by the user at any time.
