| LX100 VEHICLE ACCESSORY INTERFACE KIT
OPERATION GUIDE
PAGE 33
To enter settings for the Traction modules, press and hold the module. This will
show the traction settings page. Simply tap the option you wish to set. Tap again to
unset it.
CONFIGURING TRACTION MODULES: AIR LOCKER SETUP
1.
Press and hold
Front Traction
2.
Front Traction settings page.
Front
Axle Second
is selected by default.
The Front Traction module can be setup to operate in two ways: 'front axle second',
and 'front independent of rear'.
FRONT AXLE SECOND
'Front axle second
'
is the default mode in which the LINX system is supplied. It
automatically greys-out the
Front Traction
button making it unselectable until
the
Rear Traction
button is made active. This is a traditional safety feature of Air
Lockers that was factory hard wired in conventional installations.
