| LX100 VEHICLE ACCESSORY INTERFACE KIT
OPERATION GUIDE
PAGE 29
LINX SETTINGS SCREEN
UNITS
03
THEME COLOUR
04
LINX UPDATE
05
The LINX system’s
Auto Night Mode
integrates with the vehicles headlights and enables the user to customise the display
brightness for specific driving conditions. The
Units
for speed, distance, temperature and pressure can also be set
individually. The interface
Theme Colour
may be adjusted and a
LINX Update
will update the LINX software to ensure the
system is running the latest version of LINX (
Note:
Run a LINX Update when first installed).
NOTES
•
The
Vehicle Input Status
area
01
will show a coloured dot next to activated input connections on the controller.
•
Use the slide control on
Auto Night Mode
02
to customise the brightness level of the LINX Display for a specific
driving condition. E.g. For night driving you may want to switch your low beam lights on, then adjust the brightness
down to a level you want active when the low beam lights are next in operation.
•
Tap
Units
03
to bring up the units menu and tap the combination of units required.
•
Tap
Theme Colour
04
. Press and drag or slide to match your vehicle’s instrumentation colours.
•
Run a
LINX Update
05
to check if you have the latest software build and features on your device.
•
Tap the
Console
button
06
to enter configuration commands.
•
Tap
Calibrate Vehicle
07
then follow the instructions to calibrate the controllers orientation within the vehicle.
AUTO NIGHT MODE
02
INDICATES IF INPUT IS ON/OFF
01
UNITS SELECTION SCREEEN
THEME COLOUR SCREEN
CONSOLE
06
CALIBRATE VEHICLE
07
