background image

 2    Safe Air Compressor Operation 

 

 

 

 

6

F

 

If using extension or replacement hoses other than genuine ARB hoses, 
use only sound strong hose with secure couplings and connections having 
a high temperature rating and a maximum pressure rating of over 1380 kPa 
[200 PSI].  

F

 

Air hoses should be securely held to prevent whipping.  

F

 

Compressed air contains contaminants which makes it unsuitable for use in 
air-supplied respiratory protective devices such as spray painting masks. 
Only use compressed air with such devices when appropriately filtered 
through approved filtration equipment. 

2.1.3   Pressure Vessel Safety                                                       

 

F

 

The ARB CKMTP12 contains two mechanical pressure relief valves that will 
bleed of pressure the system above 1100kPa [160PSI]. 

F

 

The air tank contains compressed air and could result in an explosion if 
punctured. Avoid impacting the air tank with anything that could cause a 
puncture. 

F

 

If the air tank is damaged in any way it should be replaced immediately. 

2.1.4   High Temperature Safety                                                    

 

F

 

The compressor, hoses and fittings may become hot after an extended 
period of use. Caution must be exercised to avoid handling the hot 
surfaces. 

 

 

Summary of Contents for CKMTP12



















Reviews: