3 Installing the Air Locker
9
Using a caliper or similarly accurate measurement method
(i.e., able to take accurate measurements within 0.04mm [0.0015”]),
measure the distance from the shoulder of the bearing journal to
the ring gear mounting face (shown as ‘
A
’ in Figure 2.) and record
this measurement as ‘
A
’.
Measure the thickness of the factory shim removed from the end of
the differential carrier (shown as ‘
B
’ in Figure 2.) and record this
measurement as ‘
B
’.
Figure 3.
Measure the distance from the
Air Locker
bearing shoulder to the
ring g
ear mounting face (shown as ‘
C
’ in Figure 3.) and record this
measurement as ‘
C
’.
RING GEAR
FLANGE
AIR LOCKER DIFFERENTIAL
Summary of Contents for Air Locker RD111
Page 1: ...RD111 TOYOTA 8 IFS 53MM CARRIER BEARING AIR OPERATED LOCKING DIFFERENTIAL INSTALLATION GUIDE ...
Page 4: ...2 ...
Page 39: ...6 Testing Final Assembly 37 ...
Page 40: ......
