Revision Date
– 22/12/2014
page 66
9.20 Lid hinge assembly- Service
Remove the lid from the body of the fridge
Remove 2 screws as shown.
Remove the washer, hinge pin and hinge spring.
HINT: Depress the hinge pin slightly and then
release to dislodge the washer and
eject the hinge.
Clean the hinge pin and bore with a clean dry rag.
Ensure that there is no foreign material in the
bore.
Lubricate the outer surface of the hinge pin with a
paraffin based dry lubricant.
Insert the spring and hinge pin into the bore.
For 60&78L models, do not refit the washers
shown below.
Refit the large washer and fasten using the
original 2 screws. Locate the notch in the washer
with the boss in the lid as shown.
Press the hinge pin down so that the top of the
pin is flush with the washer. This will centralise
the spring within the bore.
NOTE: A ‘click’ noise may be heard as the
spring centralises in the bore.
Notch in
washer
Remove 2 screws
Do not refit
Washers
